You can enrich your maps adding extra POIs such as speed cameras downloaded from the internet in .ov2 format.
How to download the files:
Geosat is compatible with POI in OV2 format. These POi are distributed by several websites such as WWW.ADIVOR.IT Once you have downloaded the files, please check inside the folder that for each file there is also a corresponding image file (eg. speedtraps.ov2 and speedtraps.bmp )
Then use the GSUpdate in order to load them on your Geosat:
1. If you have not installed the GSUpdate yet, Read the procedure to download GSUpdate
2. Connect the navigator to the PC and start GSUpdate.
3. Select "Transfer" to load the POI files in the navigator4. Browse the PC to select the downloaded database.5. Associate the database to a safety camera category and icon (fixed speed cameras, mobile, traffic lights, special).The files will be loaded on the navigator and converted into the AvMap format. Once the procedure is completed close the application and disconnect.
Activate the POI on the Geosat:
1. Press the MENU button twice, select System setup and press the + button to confirm.
2. Select the POI tab, and choose which POI categories are displayed on the map.
3. To include or remove a category, select it with the JOYSTICK and press the + button to confirm.
Set an alarm:
1. Press the MENU button twice, select System setup and press the + button to confirm.
2. Select the Alarms tab, then select Safety Camera alarm to activate the alarm for the proximity of a safety camera.
3. The Alarm radius determines the distance at which the alarm is activated. To modify the radius, select the field to be
modified and move the JOYSTICK either up or down, then confirm by pressing the + button.
|